Rafaelmedina23 Posted September 4, 2021 Share Posted September 4, 2021 hello, I have an 8000w power jack, it has a single fan, the fan stopped turning on, I tested it directly with the batteries and it worked, maybe it is the thermostat, but I connect the terminals directly with a screwdriver and it does not turn on. I'm still going to buy the thermostat to see if it works. Anything else that could be? Quote Link to comment Share on other sites More sharing options...
dickson Posted September 4, 2021 Share Posted September 4, 2021 the fan stopped turning on, I tested it directly with the batteries and it worked, maybe it is the thermostat The fan will always turn on at 39 degree C . Use a infrared thermoniter gauge to see if fan turn on . If not then shut off the inverter and get a car toggle switch to manually turn on the fan . I use a switch to keep the fan always on for my inverter . 1 Quote Link to comment Share on other sites More sharing options...
Sid Genetry Solar Posted September 4, 2021 Share Posted September 4, 2021 7 hours ago, Rafaelmedina23 said: but I connect the terminals directly with a screwdriver and it does not turn on. If you're shorting the thermostat directly with a screwdriver and the fan doesn't run, then there must be a problem further upstream where the fan connects to the battery. 1 Quote Link to comment Share on other sites More sharing options...
Rafaelmedina23 Posted September 16, 2021 Author Share Posted September 16, 2021 On 9/4/2021 at 5:22 PM, Sid Genetry Solar said: If you're shorting the thermostat directly with a screwdriver and the fan doesn't run, then there must be a problem further upstream where the fan connects to the battery. This is exactly that, the cable that comes from the negative was broken, I put it. Thank you so much Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.